Luxon Video TVR series User Manual Download Page 41

Page: 41 / 164

User Manual of Digital Video Recorder

3.5

Manual Video Quality Diagnostics

Purpose:

The video quality of the analog channels can be diagnosed manually and you can view the diagnostic results

from a list.

Steps:

Enter the Manual Video Quality Diagnostics interface.

Menu> Manual >Manual Video Quality Diagnostics

Figure 3. 6

Video Quality Diagnostics

Check the checkboxes to select the channels for diagnostics.

Check the check box to enable video quality diagnostics. Click Handling, and the message box for

arming pops up. For getting an accurate feedback, it is recommended to set the testing schedule in the

daytime

Figure 3. 7

Diagnostics Result



Connect the camera to the device for the video quality diagnostics.



Three exception types can be diagnosed: Blurred Image, Abnormal Brightness and Color Cast.

Summary of Contents for TVR series





































































































































































Search results

Summary of Contents for TVR series

Reviews:

Luxon Video TVR series, User Manual, Page: 41 / 164

Search results

Summary of Contents for TVR series

Reviews: