Luxon Video TVR series, User Manual, Page: 104 / 164

User Manual of Digital Video Recorder
104
Task1: Configure the Line Crossing Detection.
1) Select the virtual line from the drop-down list. Up to 4 lines are selectable.
2) Select the direction to A<->B, A->B or A<-B.
3) Set the sensitivity of the line crossing detection to 1-100.
4) Click and set two points in the preview window to draw a virtual line.
You can use the to clear the existing virtual line and re-draw it.
5) Click Apply to save the settings.
Task2: Configure the Intrusion Detection.
1) Select the intrusion region from the drop-down list. Up to 4 regions are selectable.
2) Select the sensitivity of the intrusion detection to 1-100.
3) Set the percentage to 1-100. Percentage defines the ratio of the region the target object enters that can
trigger the alarm. For example, when you set the percentage as 50%, when the target enters half of
the region, the alarm will be triggered.
4) Set the time threshold to 0-10 sec. When the duration of the object in the defined detection area is
longer than the set time, the alarm will be triggered.
5) Click and draw a quadrilateral or click to draw the full screen in the preview window for
the selected intrusion region.
You can use the to clear the existing region and re-draw it.
6) Repeat the above steps to set other intrusion regions.
7) Click Apply to save the settings.