Luxon Video TVR series User Manual Download Page 149

Page: 149 / 164

User Manual of Digital Video Recorder

149

12.5

Upgrading System

Purpose:

The firmware on your DVR can be upgraded by local backup device or remote FTP server.

12.5.1

Upgrading by Local Backup Device

Steps:

Connect your DVR with a local backup device where the update firmware file is located.

Enter the Upgrade interface.

Menu > Maintenance > Upgrade

Click the

Local Upgrade

tab to enter the local upgrade menu, as shown in Figure 12. 7.

Figure 12. 7

Local Upgrade Interface

Select the update file from the backup device.

Click the

Upgrade

button to start upgrading.

After the upgrading is complete, reboot the DVR to activate the new firmware.

12.5.2

Upgrading by FTP

Before you start:

Configure PC (running FTP server) and DVR to the same Local Area Network. Run the 3

-party TFTP software

on the PC and copy the firmware into the root directory of TFTP.

Steps:

Enter the Upgrade interface.

Menu > Maintenance > Upgrade

Click the

FTP

tab to enter the local upgrade interface, as shown in Figure 12. 8.

Figure 12. 8

FTP Upgrade Interface

Enter the FTP Server Address in the text field.

Click the

Upgrade

button to start upgrading.

After the upgrading is complete, reboot the DVR to activate the new firmware.

Summary of Contents for TVR series





































































































































































Search results

Summary of Contents for TVR series

Reviews:

Luxon Video TVR series, User Manual, Page: 149 / 164

Search results

Summary of Contents for TVR series

Reviews: