Luxon Video TVR series User Manual Download Page 147

Page: 147 / 164

User Manual of Digital Video Recorder

147

Figure 12. 5

Export Log Files

Select the backup device from the dropdown list of

Device Name

Click the

Export

to export the log files to the selected backup device.

You can click the

New Folder

button to create new folder in the backup device, or click the

Format

button

to format the backup device before log export.



Please connect the backup device to DVR before operating log export.



The log files exported to the backup device are named by exporting time, e.g.,

20110514124841logBack.txt

12.3

Importing/Exporting IP Camera Info

Purpose:

The information of added IP camera can be generated into an excel file and exported to the local device for backup,

including the IP address, manage port, password of admin, etc. And the exported file can be edited on your PC,

like adding or deleting the content, and copy the setting to other devices by importing the excel file to it.

Steps:

Enter the camera management interface.

Menu > Camera > IP Camera Import/Export

Click the IP Camera Import/Export tab, the content of detected plugged external device appears.

Click the

Export

button to export configuration files to the selected local backup device.

To import a configuration file, select the file from the selected backup device and click the

Import

button.

After the importing process is completed, you must reboot the DVR.

Summary of Contents for TVR series





































































































































































Search results

Summary of Contents for TVR series

Reviews:

Luxon Video TVR series, User Manual, Page: 147 / 164

Search results

Summary of Contents for TVR series

Reviews: