SUPER AUDIO CD PLAYER D-06u
2
How to handle discs
• Do not use any deficient disc (with cracks, warp, etc.).
• Do not damage the signal surface of the disc or grime it.
• Do not place paper or a sticker on the disc. This can warp
the disc and playback may become impossible. In many
cases, rental discs carry labels and paste may protrude
from under the label. Before use, check that the disc is free
from protruding paste or the like.
• Do not play with two discs in a stack.
How to store discs
• Always put your discs in a case. Store them vertically where
high temperature, high humidity, and direct exposure to
sunlight are not prevalent. Places with extremely low tem-
perature should also be avoided.
• Read the caution notes carefully that are attached to discs.
Disc cleaning
• If a disc is dirty from fingerprints or dusty, the sound quality
may be lowered. Lightly wipe the disc with soft cloth, from
the inside to outer periphery. (Refrain from wiping it along
the circumference.)
• Do not use a volatile chemical such as benzine or thinner.
Record spray, anti-static agents, and other such materials
cannot be used either.
• Where the disc seems to be very dirty, dip soft cloth in wa-
ter, wring it well, and remove contaminants. Lastly, remove
the moisture with dry cloth.
Disc in a specific shape
This unit cannot accept discs in specific shapes (heart-
shaped, hexagonal, etc.) for playback. Never use such discs
as they can cause malfunctions.
Lens cleaning
If the lens is dusty, sound skips may take place. Please read
"After-sales Services and Quality Assurance" (Page XX) and
ask us for cleaning. Do not use any cleaning substance for
discs available on the market because they may hurt the lens.
Notice when handling optical digital cables
• Do not fold the cables. For storage, wind each cable to
make a coil whose diameter is approx.15 cm or larger.
• For connection, insert the cable connectors firmly into the
terminals of this unit and the other device.
• Use the cables whose each length is 3 m or less.
• When the cable connectors get dusty, wipe the dust away
with a dry soft cloth before inserting into the terminals.
Cleaning
• Usually, wipe the unit with a dry soft cloth. When the dirt
is hard to remove, dip soft cloth in detergent diluted 5 or 6
times with water, wring it well, and remove contaminants.
Then, remove the moisture with dry cloth.
• Do not use a solvent like alcohol, benzine, thinner, or pes-
ticide because such a substance can damage the exterior.
In addition, do not let this unit contact a rubber or plastic
form for a long time. That may damage the cabinet surface
of the unit.
• When using a chemical cloth for cleaning, read the caution
provided with the chemical cloth product.
• Before cleaning, unplug the power cord from the AC outlet.
