SUPER AUDIO CD PLAYER D-06u
20
4. USB digital input terminal (USB)
This is a USB (B-type) input terminal used for the digital
input signal from such device as a PC/Mac using a USB
cable.
The terminal is applicable to the following signals.
• PCM signal
Sampling frequency
: 32kHz, 44.1kHz, 48kHz,
88.2kHz, 96kHz, 176.4kHz,
192kHz, 352.8kHz, 384kHz
Number of quantization bits : 16bit, 24bit, 32bit
• DSD signal
Sampling frequency
: 2.8224MHz, 5.6448MHz
Number of quantization bits : 1bit
When the OS is Windows, the dedicated driver software
needs to be installed.
Read the separate software installation manual.
5. Coaxial digital input terminal (COAX)
When using this unit as a D/A converter, transmit digital sig-
nals from a CD player or the like that has a digital output
terminal to this unit using a coaxial digital cable.
The terminal is applicable to the following signals.
Sampling frequency
: 32kHz, 44.1kHz, 48kHz,
88.2kHz, 96kHz, 176.4kHz,
192kHz
Number of quantization bits : 16bit, 20bit, 24bit
6. Optical digital output terminal (OPT)
Connect this terminal to such device as an amplifier that
has a digital input terminal using an optical digital cable.
When a Super Audio CD (HD layer selected) or a DSD file is
reproduced, a digital audio output cannot be not provided.
When the PCM data of 32 kHz, 352.8 kHz, or 384 kHz sam-
pling frequency is reproduced, a digital audio output cannot
be provided.
This terminal has a shutter. Direct the cable connector cor-
rectly when inserting the cable into the terminal. If the cable
connector is inserted forcibly with the wrong direction, the
terminal may be deformed, and the shutter may not be able
to close even after cable disconnection.
7. Coaxial digital output terminal (COAX)
Connect this terminal to such device as an amplifier that
has a digital input terminal using an coaxial digital cable.
When a Super Audio CD (HD layer selected) or a DSD file is
reproduced, a digital audio output cannot be not provided.
When the PCM data of 32 kHz, 352.8 kHz, or 384 kHz sam-
pling frequency is reproduced, a digital audio output cannot
be provided.
8. Main power switch (MAIN POWER)
Turns this unit to the standby state.
When this switch is set to ON, the standby indicator on the
front panel lights up to show that this unit turns to the stand-
by state.
When this switch is set to OFF, the standby indicator on the
front panel turns off to show that the main power is turned
off.
9. Power cable terminal (AC IN)
Connect the accessory power cable to supply the power
from the AC outlet on the wall.
