SUPER AUDIO CD PLAYER D-06u
44
Problem
Cause/Solution
Ref. page
No sound is generated from the
speakers, or sound is distorted.
· Confirm that the connections of audio cables are correct.
20 - 21
· If a digital output device is connected to this unit, set [Digital output]
to [On].
10
· Clean the disc to remove dirt.
2
· When the output level of an amplifier, etc. is minimum, adjust the
volume.
· Confirm that the cable connectors are connected and firmly inserted
into the terminals of the unit.
· Clean the cable connectors and terminals by using a plain dry cloth or
a cloth dipped in a small amount of dehydrated alcohol.
Digital audio signals cannot be
output digitally.
· Set [Digital output] to [On].
10
· When the HD layer of a Super Audio CD, a DSD file, or a PCM file with
sampling frequency of 32 Hz, 352.8 kHz, or 384 kHz is reproduced,
a digital audio output cannot be provided.
19
The output levels of SACD and
CD are quite different.
· This is due to the difference in recording format.
This unit may not work normally when the unit is subject to external influence such as static electricity. In such a case, normal operation
may resume by turning off the power once and turning on the power again after several tens of seconds or returning the unit to the fac-
tory setting. If the problem is not solved, please contact your dealer or our service center.
