4
Installing and Configuring the Keypad
If you have a system with a main Control Panel, ensure it is in
Test or Programming Mode. If you have a system without a Control
Panel, ensure that the Siren is in Service mode.
Fig. 2
Wall Mounting Plate
Fixing
Screw
Anti-Tamper
Protection
1. Undo and remove the fixing screw from the bottom edge of the
Keypad and remove the wall mounting plate. (Fig. ).
. Using the mounting plate as a template to mark the positions of
the four fixing holes on the wall.
Note:
To make the best use of anti-tamper protection you
must insert a wall plug and screw in the specified hole (as
illustrated).
3. Fix the mounting plate to the wall using the screws and wall plugs
provided, (a 5mm hole will be required for the wall plugs). Do
not over-tighten the fixing screws as this may distort or damage
the mounting plate.
Note:
Installing the Keypad against a flat and smooth wall is of