LuxaFlex EasyRise Duette, Installation Operation Care

Page: 8 / 24

INSTALLATION
6
■ ■
Attach the installation or extension brackets using the screws provided.
IMPORTANT: The front edges of the installation brackets must be level and aligned to
each other.
■ ■
If using spacer blocks, first attach the installation bracket to the 13mm
spacer block before stacking additional spacer blocks together.
■ ➤
Insert the legs of the installation bracket into the tabs on the spacer
block.
■ ➤
Then rotate the installation bracket back.
■ ■
Attach the spacer block(s) and installation bracket to a flat
vertical mounting surface with a #6 mounting screw long
enough for a secure installation.
■ ➤
A maximum of 40mm of spacer blocks per installation
bracket is recommended.
■ ➤
The top of the spacer blocks should be at the desired
shade height.
IMPORTANT:
The front edges of the installation brackets
must be level and aligned to each other.
CAUTION:
Use drywall anchors when mounting into
drywall.
■ ■
If using extension brackets, attach an installation bracket
to the underside of each extension bracket using the
provided screws and speed nuts.
Proceed to “Install the Shade” on page 7.
Tab
Longer Screw
(Not Provided)
Maximum
40mm
18.019.008-DUETTE-EASYRISE-INSTALL.indd 6 4/06/2019 10:51:50 AM