LuxaFlex EasyRise Duette, Installation Operation Care

Page: 7 / 24

INSTALLATION
5
Mount the Installation Brackets — Face Mount
■ ■
Centre the headrail over the window opening at the desired height. Use a pencil to lightly mark
each end of the headrail on the mounting surface.
■ ➤
Alternatively, measure the width of the headrail and use that width to mark the headrail end
points over the window opening.
■ ■
Mark 50mm from each end of the headrail.
■ ➤
If more than two installation brackets came with your order, space additional bracket(s)
evenly between the two end brackets and mark their location. Mount into wood whenever
possible.
■ ■
Centre the installation brackets on your marks and mark the location of the screw holes.
■ ➤
A minimum mounting surface height of 30mm for installation brackets or extension brackets
is required.
■ ➤
The top of the installation brackets or extension brackets should be at the desired height. The
brackets should be level and aligned.
■ ➤
When using extension brackets, mark two screw holes per bracket.
CAUTION: The rear of the brackets must be flush against a flat mounting surface. Do not
mount brackets on curved molding.
■ ■
Drill the screw holes using a 3mm drill bit.
CAUTION: Use drywall anchors when mounting into drywall.
Headrail End Marks
Window Opening
50mm Space Evenly Space Evenly 50mm
18.019.008-DUETTE-EASYRISE-INSTALL.indd 5 4/06/2019 10:51:50 AM