LuxaFlex EasyRise Duette, Installation Operation Care

Page: 11 / 24

INSTALLATION
9
■ ■
Hold the cord tensioner firmly in place and check that the cord can
move freely through it. If the cord does not move freely through the
cord tensioner, it is too tight and the cord tensioner and/or bracket
should be moved up. If the cord tensioner locks onto the cord, it is too
loose and the cord tensioner and/or bracket should be moved down.
Mark and pre-drill the screw hole.
■ ■
Mount the cord tensioner with a Phillips screwdriver and one of
the longer screws provided to attach the cord tensioner directly to
the wall.
■ ■
Finally, ensure the cord can move freely through the cord tensioner
without engaging the lock. The centre of the screw hole should
be aligned with the indicator line on the cord tensioner. Do
not pull the screw hole down to the bottom of the slot. This
may cause the cord to become too tight, affecting the window
covering function and increasing cord wear.
Reveal Mount with a Bracket
■ ■
This option uses three screws with the Reveal Mount bracket
and slightly projects the cord loop from the window covering
allowing for easier access. Locate the cord tensioner as close
to the window glass as possible to minimise accessibility by
children and pets. Be sure the cord tensioner is not placed in
the path of the bottom rail and fabric.
■ ■
Break off the Reveal Mount bracket and mark screw locations.
Reveal Face
18.019.008-DUETTE-EASYRISE-INSTALL.indd 9 4/06/2019 10:51:51 AM