Lux Tools A-FMR-20 Set, Original Instructions Manual

Page: 26 / 100

GB
26
Switching on and off
– Hold the device firmly with both hands.
– Dip the stirrer vertically into the substance to be
mixed.
– To start the tool turning, press the On/Off
switch (7) with the switch lock (6) held down and
hold them down.
– To switch the device off, release the On/Off
switch (7).
Electronic control of revolutions
The unit is fitted with an electronic revolution control
function.
The revolutions can be set to any level you require
(revolution range:
►
Technical data – p. 27 ).
– When inserting into/removing from the sub-
stance, use low revolutions.
– During the mixing process, move the stirrer
around inside the container. Continue to mix until
all of the substance has been fully combined.
Cleaning
Cleaning overview
Regularly and according to the operating condi-
tions
Storage, transportation
Storage
– Clean unit before storing.
– Store the tool in a dry and well ventilated place.
Transportation
– When dispatching, try to use the original packag-
ing, if possible.
Troubleshooting
What to do when something doesn’t work…
Malfunctions are often caused by minor faults. You
can easily remedy most of these yourself. Please
consult the following table before contacting the ven-
dor. You will save yourself a lot of trouble and possibly
money too.
If you can’t fix the fault yourself, contact your nearest
vendor. Please be aware that any improper repairs
will also invalidate the warranty and additional costs
may be incurred.
Disposal
Disposal of the appliance
A crossed-out wheelie bin icon means: Bat-
teries and rechargeable batteries, electrical
or electronic devices must not be disposed of
with household waste. They may contain
substances that are harmful to the environ-
ment and human health.
Consumers must dispose of waste electrical devices,
spent portable batteries and rechargeable batteries
separately from household waste at an official collec-
tion point to ensure that these items are processed
correctly. Information on returning these items is
available from the seller. Sellers are required to
accept these items free of charge.
Batteries and rechargeable batteries, which
are not permanently installed in waste elec-
trical devices, must be removed prior to dis-
posal and must be disposed of separately.
Lithium batteries and battery packs in all systems
must only be retuned to a collection point when dis-
DANGER! Risk of injury! Wear goggles.
Do not reach into the operating stirrer.
Always start mixing with low revolutions.
NOTICE! Risk of damage to the unit! The
motor may overheat in the event of perma-
nent heavy loads and low revolutions. Run
the motor at higher revolutions in idle to
allow it to cool down.
DANGER! Risk of injury if switched on
accidentally!
Pull out the power plug before
conducting any work on the device.
What? How?
Check the power cable
and plug for damage. Conduct a visual inspec-
tion and have the cable
replaced by an electrician
if necessary.
What? How?
Clean the ventilation slots
of the motor to remove
dust. Use a vacuum or a brush
to clean out the ventila-
tion slots.
Clean the device. Wipe the unit with a damp
cloth.
WARNING! Risk of injury!
Store the unit in
such a way that it cannot be started by unau-
thorised persons.
NOTICE! Risk of damage to the device!
Do not stored unprotected in a damp envi-
ronment.
DANGER! Risk of injury! Unprofessional
repairs may mean that your device will no
longer operate safely. This endangers you
and your environment.
Error/Fault Cause Remedy
Device does not work. Is the device defective? Contact your local vendor.
Battery pack discharged?
►
Charging the battery pack –
p. 25 .
Battery pack defective? Contact your local vendor.
Motor electronic faulty? Contact your local vendor.