21
of time you work with the tool. All parts of the operating cycle
must be taken into account for this purpose (for example, also
including times in which the power tool is switched off and
times in which it is switched on, but is running without load).
Approved fuels
• Normal petrol, 91 octane; if no regular
petrol is available, you can also use petrol
with a higher octane ratio.
• 2-stroke motor oil for air-cooled motors,
high quality
Mix ratio: 1:
4
0, therefore
Instructions for fuels
Fuels with ethanol mixtures (e. g. E10)
Fuels with high ethanol mixture are more
aggressive than fuels with less or without
ethanol mixture. Possibly painted surfaces
and plastics can be strongly affected or dam-
aged. Moreover, fuel with ethanol mixture
strongly reacts to influential factors such as
light rays, temperature and storage time.
Hence, these fuels should be stored only in
allowed containers and in suitable place for
not more than 30 days.
It is recommendable to empty the fuel tank
as well as the steam separator (carburettor) if
combustion engine takes longer time to shut-
down.
All our devices are suitable for using the E10
fuel.
Fuels with ethanol mixtures (e. g. E10) for
2-Stroke-Motor
2-Stroke-Motors (Motors with petrol lubrica-
tion) must be adjusted to the usage of fuel
with high ethanol mixture (more than 5%,
e.g. E10) by specialist workshop. Thus, the
country-specific environmental conditions
are to be considered and observed.
Special fuels for 2-stroke-motors
Pay attention to the details about required
mixing ratio in these instructions for use.
Some completely mixed fuels or special fuels
(e. g. Aspen 2t or Stihl Motomix) are
provided only in mixing ratio of 1:
4
0.
Usable saw chain oil
Use only special saw chain oils with good
adhesion properties. Since the saw chain oil
can penetrate the environment during opera-
tion, biologically-degradable special vegeta-
ble-based saw chain oils should be used.
NOTICE! Device damage!
Use only
the specfied fuel. Do not use oil for
auto motors or outboard motors.
Note:
When mixed, fuel ages espe-
cially quickly: do not mix more fuel
than you will use in 1 month.
Normal petrol
Mix with 2-stroke motor
oil
1000 ml
2
5
ml
2000 ml
50
ml
3000 ml
75
ml
5000 ml
1
25
ml
NOTICE! Device damage!
Under no
circumstances should you use old oil
to grease the saw chain! This can
cause damage to the oil pump, saw
rail and chain!
GB
temp.book Seite 21 Donnerstag, 5. November 2015 8:59 08
Summary of Contents for 468419
Page 4: ...4 1 18 19 3 4 5 18 17 6 10 8 7 22 8 temp book Seite 4 Donnerstag 5 November 2015 8 59 08 ...
Page 5: ...5 4 14 20 7 9 9 13 6 11 temp book Seite 5 Donnerstag 5 November 2015 8 59 08 ...
Page 6: ...6 3 23 24 25 12 13 temp book Seite 6 Donnerstag 5 November 2015 8 59 08 ...
Page 41: ...41 temp book Seite 41 Donnerstag 5 November 2015 8 59 08 ...
