Safety
Personnel qualification
7
© Lutz-Jesco GmbH 2015
Subject to technical changes.
150527
BA-70200-02-V01
Polymer preparing and dosing station EASYPURE Powder and Liquid
Operating instructions
Corresponding protective equipment must be used during these tasks:
n
commissioning,
n
working on the device during operation,
n
shutdown,
n
maintenance work,
n
disposal.
2.5 Personnel qualification
Any personnel who work on the device must have appropriate special
knowledge and skills.
Anybody who works on the product must meet the conditions below:
n
attendance at all the training courses offered by the owner,
n
personal suitability for the respective activity,
n
sufficient qualification for the respective activity,
n
training in how to handle the device,
n
knowledge of safety equipment and the way this equipment functions,
n
knowledge of these operating instructions, particularly of safety
instructions and sections relevant for the activity,
n
knowledge of fundamental regulations regarding health and safety
and accident prevention.
All persons must generally have the following minimum qualification:
n
training as specialists to carry out work on the device unsupervised,
n
sufficient training that they can work on the device under the
supervision and guidance of a trained specialist.
These operating instructions differentiate between these user groups:
2.5.1 Specialist staff
Specialist staff are able, thanks to their professional training, knowledge
and experience as well as knowledge of the respective provisions, to do
the job allocated to them and recognise and/or eliminate any possible
dangers by themselves.
2.5.2 Trained electricians
Due to their professional training, knowledge and experience as well as
knowledge of specific standards and provisions, trained electricians are
able to do the electrical work assigned to them and to recognise and
avoid any any potential dangers by themselves.
They are specially trained for their specific working environment and are
familiar with relevant standards and provisions.
They must comply with the legally binding regulations on accident
prevention.
2.5.3 Trained persons
Trained persons have received training from the operator about the tasks
they are to perform and about the dangers stemming from improper
behaviour.
Trained persons have attended all trainings offered by the operator.
2.5.4 Personnel tasks
In the table below you can check what qualifications are the pre-condi-
tion for the respective tasks. Only people with appropriate qualifications
are allowed to perform these tasks!
Qualification
Activities
Specialist staff
n
Assembly
n
Hydraulic installations
n
Commissioning
n
Taking out of operation
n
Fault rectification
n
Maintenance
n
Repairs
n
Disposal
Trained electricians
n
Electrical installation
n
Rectifying electrical faults
n
Electrical repairs
Trained persons
n
Control
n
Storage
n
Transportation
Table 3: Personnel qualification
Summary of Contents for EASYPURE 1000
Page 2: ......
