R
S p e c i f i c at i o n S u b m i t ta l
page
Job Name:
Job Number:
Model Numbers:
QS System
QSE-CI-NWK-E
Control Interface
369373b 3 06.21.12
2.47
(62.7)
3.75
(95.3)
4.26
(108.2)
5.26
(133.6)
1.06
(26.9)
Mounting holes
Terminal
blocks
on this side
LEDs and addressing
switches on this side
Dimensions
Dimensions are in inches (mm)
0.34
(8.6) dia.
0.18
(4.6) dia.
0.18
(4.6) dia.
0.25
(6.4)
#6 or #8 (M3 or M4)
screw recommended
Mounting Hole Detail
Mounting Options
Mounting Methods
Mount where terminal blocks, switches, and LEDs are
accessible. Strip
4
in (10 mm) of insulation from
wires. Each data link terminal will accept up to two
18 AWG (1.0 mm
2
) wires. Connect wiring as shown
on the Wiring page. Choose from the following
mounting methods:
1: Direct Wall Mounting
Mount the control interface directly on a wall, as
shown in Mounting Methods at right, using screws
(not included). When mounting, provide sufficient
space for connecting cables.
2: Rack Mounting
Place the unit can in the LUT-19AV-1U AV rack using
screws (not included). The LUT-19AV-1U will hold up
to four units.
3: Enclosed Wall Mounting
If conduit is desired for wiring, use the
LUT-5x10-ENC to mount one unit.
lut-19aV-1u
2
lut-5x10-enc
5.26
4.26
3.75
2.50
1.06
control interface
Wall
1
3
