When a
GRAFIK Eye
QS wireless system includes a
Pico
wireless control, you can use the
Pico
wireless
control as
either
a scene controller or a zone controller. This page describes using the
Pico
wireless control
as a scene controller; the previous page describes using it as a zone controller.
To use the
Pico
wireless control as a scene controller with a
GRAFIK Eye
QS Wireless control unit:
1. On the
Pico,
press and hold the top (on) and bottom (off) buttons for 3 seconds. The LED on the
Pico
will
flash slowly, and the scene button LEDs on the
GRAFIK Eye
QS will all flash.
2. On the
GRAFIK Eye
QS, the info screen will ask for confirmation that you wish to change the type; press
the OK button. Use the master buttons on the
GRAFIK Eye
QS to select “Scene”. Press OK to save.
3. To associate the
GRAFIK Eye
QS with the
Pico
, press and hold the top scene button on the
GRAFIK Eye
QS for 3 seconds (until the LEDs all flash).
To disassociate the
GRAFIK Eye
QS with the
Pico
, press and hold the bottom scene button on the
GRAFIK Eye
QS for 3 seconds (until the LEDs stop flashing).
4. On the
Pico,
press and hold the top (on) and bottom (off) buttons for 3 seconds. The LED on the
Pico
and
the LEDs on associated
GRAFIK Eye
QS Wireless control units will stop flashing.
Functionality of the
Pico
control when programmed as a scene controller:
Top button:
Scene 1
Center round button:
Scene 16
Bottom button:
Off
Note:
The wireless signal has a range of 30 feet (10 m) through standard construction.
Wireless System Programming
R
GRAFIK Eye
®
QS Wireless System Programming
Light
On
Adjust
Off
Change type?
Scene
Saved
Saved
Pico
Change type?
Press OK
OK
1
2
3
4
5
6
9
10
11
12
13
14
7
8
15
16
9-16
1-8
On the
GRAFIK Eye
QS control
unit, press and hold the top scene
button for 3 seconds to associate,
or press and hold the bottom
scene button for 3 seconds to
disassociate with the
Pico
control.
Associate
OR
Disassociate
Info
screen
Associating Pico
TM
Wireless Controls and
GRAFIK Eye
QS Wireless Control Units
