32
33
Wilma
Wilma
Deut
sc
h
Engli
sh
2
2
Mounting
1
2
For mounting, please first loosen the bolts on
the helmet mount/headband. Please now use
the o-ring and bolts which came with your quick-
release mount. Put the bolt through the hole of
the handlebar mount, then put the second o-ring
onto the tip of the bolt.
The order of lamp, o-ring,
handlebar mount, o-ring, bolt must be strictly
adhered to as shown in the picture in order to
ensure flawless functionality.
After that, tighten
the bolt slightly first, then securely with 2 Nm.
Cover the open thread with the included plug.
For mounting the Betty R on a handlebar, three
optional CNC Quick Release mounts are available.
Have a look at
www.lupine.de
Art.No. 1025 for Ø 25.4 mm
Art.No. 1031 for Ø 31.8 mm
Art.No. 1035 for Ø 35.0 mm
Handlebar mounting:
Put the clamp around the
handle bar and close.
Peppi V4 (CNC) and V5 (Polyamid):
Our Peppi allows to mount the remote switch on a handlebar.
Have a look at:
www.lupine.de
(Art.No. 760) and (Art.No. 1066)
GoPro Adapter:
By help of our CNC machined mount, you can put
the Wilma on the standard mount for GoPro.
Have a look at:
www.lupine.de
(Art.No. 1070)
The Bluetooth Remote comes together with the Peppi V5 barmount (helmet & bikelights) or a brace-
let (Headlamps). On the bike, the best way to mount the remote is directly next to your grips so you
have full control an don't need to take off your hands while riding. The bracelet can be attached to a
lot of other things like ski poles, too.
Peppi V5 Bracelet
