Lunar Caravans, User Manual

Page: 64 / 120

64
TRUMA COMBI BOILER
OPERATING INSTRUCTIONS
The heater is controlled by the digital
operating display and control unit fitted above
the entrance door.
Initial operation or activation after a power
cut
After the operating voltage has been
connected, the unit will beep and the display
remains dark. To switch on, press the
key and the main screen will appear.
Function description
Note: More details regarding the operating
modes you will find in the operating
instruction of your Combi.
On/Off
- Display and heater is switched on and/or
off
- The clock is shown when the time is set
- After an interruption in the operating
voltage, the display and the heater are
switched off. If the time is shown, this
needs to be set.
Green LED shines when the heater is on
Green LED flashes when the heater is
after-running
Red LED shines when there is a
malfunction
Manual mode
- In manual mode, the heater is controlled
via the 4 keys below the display.
- It is not necessary to set the time
because the Truma logo is shown in the
display instead of the time.
Note: A pre-selection between summer/winter
operation must be made via the set-up.
Room temperature
When the menu is selected the yellow LED
shines.
The current set room temperature is
displayed and can be changed.
Selection key upwards to select functions
or set values
Selection key downwards to select
functions or set values
Selection key backwards to select values
Selection key forwards to select values
Main Screen
Room
temperature: Display on when the heater is active.
Timer: Display on when the timer is active.
Clock: Only if the clock has been set, otherwise
the Truma logo will appear in the display.
Status of the heater:
H: Set room temperature (eg. 18ºC)
EG: Energy selection (E=Electro, G=Gas)
W: Set water temperature.