DATA VIEWING AND DATA TRANSFER OPTIONS:
It is possible to view the images and videos directly on the unit’s micro-display.
To do so, while the unit is operating press the Power button (5) momentarily
just once. You will be able to switch between images and videos by pressing
IMAGE button (4) in or – direction. To play the recorded video, press
PIC button (3) once. To stop playing video press PIC button again. To exit
picture/video viewing mode and to come back to the active image mode, press
Power button (5) briefly just once. Please note – if you press and hold Power
button, your unit will shut down and would need to be reactivated again by
pressing Power button once.
You can connect the unit directly to the computer via USB connection by
utilizing the micro-USB connector (11). To do so, first connect the micro-USB
part to the unit, then connect the standard USB part to the computer. Look
through the eyepiece – choose MASS STORAGE option via the IMAGE button
and confirm your selection with either PIC or REC button (depending on the
software version). Once connected to the computer, the software will
download automatically and you will be able to open and transfer all of your
SD-card files onto your computer.
Alternatively, you can remove the micro-SD card from the binocular and use it
in the included USB flash drive adapter to transfer data to your computer. If
your computer has a direct micro-SD slot, you can insert the card directly to the
slot bypassing the above options. It is also possible to utilize the full-size SD
card adapter (not included with
binocular).
CONNECTING TO EXTERNAL VIDEO SOURCE:
You can connect your device to the TV/VCR/DVR via the RCA-type video cord
(included with your device) in order to view the video stream directly on the
monitor/TV. Connect the small end of the Video cable to the Video Output (14)
and then connect the yellow plug to the TV/Recorder video input. NOTE – if
you live outside of USA, you may need to switch the Video Output from NTSC
to PAL by accessing the menu (Press IR Button for 2 seconds and when Menu
appears select the Video format option. Switch between NTSC and PAL formats
by pressing the Image Button and confirm your setting by pressing IR button).
WI-FI LINK INSTRUCTIONS:
1.
Download “ROADCAM” App on your Android
phone/tablet or on iPhone/iPad. For Android
users if you have a problem finding the app in
Google Play Store, please scan the QR code on
the right
2.
Press PIC button for 3 seconds to activate your
monocular WI-FI setup. Look through the