click on the highlighted disc and choose the same function). A pop-up
window will appear. You can label your partition (such as “Luna Optics
Monocular” or any other name you desire (it’s optional) and then
make sure to select “FAT32” as the File System. Then click “OK”.
Once the format is finished, click on “Apply” located in the most upper
left corner. You must select “Apply” otherwise the formatting is not
finished.
You card is now formatted, but before you can use your 64GB+ card in our digital
night vision product you must also format the card inside the product. To do so,
insert the card into its slot, turn the night vision on and through the menu find
and select “Format”, then select “OK”. Once the card is formatted inside the
night vision device it is now ready to use.
TROUBLESHOOTING:
1.
Unit does not turn on and the light indicator is off:
a)
please check if the batteries are inserted correctly
b)
please make sure the batteries are fresh
2.
The light indicator is working, but you cannot see the image:
a)
you may be turning the unit on in a dark area with the
lens cover still on the unit
b)
You may need to turn on the infrared light and/or remove
the Daytime Color Enhancement Filter
3.
Unable to obtain sharp and clear image:
a)
you may need to repeat the process of rotating the
oculars and objective lens several times until you get a
good feel of it
b)
You may be viewing an object that it too close – the
minimum focusing distance is approximately 80cm or
2.6ft
4.
I switch from active image to photo/video review and the unit shuts
off:
a)
You are pressing the Power button too long. You must
only press the Power button momentarily.
5.
Image freezes during operation or during initial turn on:
a)
Open at least one battery compartment and then re-
activate the unit.
6.
I’m trying to turn the IR illuminator on and instead I see the
date/time menu:
a)
You are holding the IR button for more than 1 sec. In
order to turn the IR illuminator on, you must press the IR
button once and immediately release it.
