Luminex Luminex 200, System User Manual

Page: 15 / 64

x
MAP Technology
Safety
5
Mechanical
Access doors must be closed while operating the Luminex 200
analyzer; the operator must be present during operation.
Biological
Heat
Blue Indicator Light
The blue light above the Luminex 200 analyzer sample arm indicates
the on/off status of the Luminex 200 analyzer, and is harmless. The
blue light-emitting diode (LED) does not emit light in the UV
spectrum.
Warning: During operation, this system contains exposed,
moving parts. Risk of personal injury is present. Observe all
warnings and cautions.
Warning: During operation, this system contains exposed,
moving parts which could result in puncture hazard. Risk of
personal injury is present. Keep hands and fingers away from the
Luminex XYP instrument slot during operation.
Warning: During operation, this system contains exposed,
moving parts which could result in pinch point hazard. Risk of
personal injury is present. Keep hands and fingers away from the
Luminex XYP instrument slot during operation.
Warning: Human and animal samples may contain biohazardous
infectious agents.
Where exposure (including aerosol) to potentially biohazardous
material exists, follow appropriate biosafety procedures and use
personal protective equipment, such as gloves, gowns, laboratory
coats, face shields, or mask and eye protection, and ventilation
devices.
Observe all local, state, and federal biohazard handling
regulations when disposing of biohazardous waste material.
Warning: The heater plate of the Luminex XYP instrument may
be hot and could cause personal injury if touched. Do not touch
the heater plate.