Luminex Luminex 200, System User Manual

Page: 12 / 64

Luminex 200 System User Manual
2
Symbols
These symbols describe warnings, cautions, and general information
used in the operation of this instrument. Some of these symbols are
further defined under “Safety Precautions.”
Safety Precautions
Read the following safety information before setting up or using the
Luminex 200 analyzer. A user should be present during operation.
This system contains electrical, mechanical, and laser components
which, if handled improperly, are potentially harmful. In addition,
biological hazards may be present during system operation.
Therefore, we recommend that all system users become familiar with
the specific safety advisories below, in addition to adhering to
standard laboratory safety practices. The protection provided by the
equipment may be impaired or the warranty voided if the system is
used in a manner not specified by the instructions or by Luminex
Corporation.
Fluidics
This system contains fluidics. In the event of a fluid leak, turn off all
power to the system and disconnect all power cords. The on/off
Symbol Description Symbol Description Symbol Description
Alternating current
(AC)
Warning
(refer to manual) Warning
(refer to manual)
Protective ground
Warning
(refer to manual) Warning
(refer to manual)
On
Warning
(refer to manual) Warning (refer to
manual)
Off
Catalog Number Consult instructions
for use
In vitro Diagnostic
Medical Device Batch Code Serial Number
Temperature
Limitation
Expiration Date Date of Manufacture
Manufacturer Underwriter’s
Laboratory Canadian
Underwriter’s
Laboratory
European Union
Conformity WEEE - Do not
throw in trash