Guidance and manufacturer’s declaration – electromagnetic immunity
The LuminaNRG Evolution (Model: LuminaNRG Evolution) is intended for use in the
electromagnetic environment specified below. The customer or the user of the
LuminaNRG Evolution (Model: LuminaNRG Evolution) should assure that it is used in
such an environment.
Immunity
test
IEC 60601
test level
Compliance
level
Electromagnetic environment – guidance
Conducted
RF
IEC
61000-4-6
Radiated
RF
IEC
61000-4-3
3 Vrms
150 kHz to
80MHz
3 V/m
80 MHz to
2.5GHz
Not
Applicable
3 V/m
Portable and mobile RF communications
equipment should be used no closer to any
part of the LuminaNRG Evolution (Model:
LuminaNRG Evolution), including cables,
than the recommended separation distance
calculated from the equation applicable to
the frequency of the transmitter. Recom-
mended separation distance
Where P is the maximum output power
rating of the transmitter in watts (W)
according to the transmitter manufacturer
and d is the recommended separation
Distance in meters (m).
Field strengths from fixed RF transmitters,
as determined by an electromagnetic site
survey,
a. should be less than the compliance level
in each frequency range.
b. Interference may occur in the vicinity of
Equipment marked with the following
symbol:
NOTE 1 At 80 MHz and 800 MHz, the higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propaga-
tion is affected by absorption and reflection from structures, objects and people.
a. Field strengths from fixed transmitters, such as base stations for radio
(cellular/cordless) telephones and land mobile radios, amateur radio, AM and FM
radio broadcast and TV broadcast cannot be predicted theoretically with accuracy.
To assess the electromagnetic environment due to fixed RF transmitters, an
electromagnetic site survey should be considered. If the measured field strength in
the location in which the LuminaNRG Evolution (Model: LuminaNRG Evolution) is
used exceeds the applicable RF compliance level above, the LuminaNRG Evolution
(Model: LuminaNRG Evolution) should be observed to verify normal operation. If
abnormal performance is observed, additional measures may be necessary, such
as re-orienting or relocating the LuminaNRG Evolution (Model: LuminaNRG
Evolution).
b. Over the frequency range 150 kHz to 80 MHz, field strengths should be less than
3 V/m.
Recommended separation distances between portable and mobile RF
communications equipment and the Model LuminaNRG
The LuminaNRG Evolution (Model: LuminaNRG Evolution) is intended for use in an
electromagnetic environment in which radiated RF disturbances are control RGB. The
customer or the user of the LuminaNRG Evolution (Model: LuminaNRG Evolution) can
help prevent electromagnetic interference by maintaining a minimum distance between
portable and mobile RF communications equipment (transmitters) and the LuminaNRG
Evolution (Model: LuminaNRG Evolution) as recommended below, according to the
maximum output power of the communications equipment.
Rated maximum
output power of
transmitter (W)
Separation distance according to frequency of transmitter (m)
150 kHz to
80 MHz
80 MHz to
800 MHz
800 MHz to
2.5 GHz
0.01
0.12 0.12
0.23
0.1
0.38 0.38
0.73
1
1.2 1.2
2.3
10
3.8 3.8
7.3
100
12 12
23
For transmitters rated at a maximum output power not listed above, the
recommended separation distance d in meters (m) can be estimated using the
equation applicable to the frequency of the transmitter, where P is the maximum
output power rating of the transmitter in watts (W) according to the transmitter
manufacturer.
NOTE1 At 80 MHz and 800 MHz, the separation distance for the higher frequency
range applies.
NOTE2 These guidelines may not apply in all situations. Electromagnetic
propagation is affected by absorption and reflection from structures, objects and
people.
17
18
