Lumi LPA19-444 Installation Instructions Manual Download Page 6

Page: 6 / 6

7. Cable Management

Note:

Leave slack in cables to allow for cantilever arm movement.

• Remove cable covers as required, Connect cables to your TV and route along the arms.
• Re-attach the cable covers to hold the cables in place .

8. Adjusting Wall Mount Head

Depending on the weight of the display, it is necessary to slightly loosen or tighten the adjustment
screw using an Allen key.

M-L

Summary of Contents for LPA19-444

Page 1: ...11 400x400 600x400 400x200 300x300 60 MAX CAUTION DO NOT EXCEED MAXIMUM LISTED WEIGHT CAPACITY SERIOUS INJURY OR PROPERTY DAMAGE MAY OCCUR 45kg 99lbs MAX 3 3 15 15 120 Maintenance Check that the bracket is secure and safe to use at regular intervals at least every three months Please contact your dealer if you have any questions ...

Page 4: ...6 5 5 Installing Adapter Bracket 3 Installing Decorative Covers 4 Removing the lower thumbscrew 5 1 For Flat Back Screen TV TV TV Tighten all screws but do not over tighten M A M C M E M G M I ...

Page 5: ...ccess A V Inputs TV TV TV or Tighten all screws but do not over tighten Position the adapter bracket as close as possible to the middle of the screen Screw the adapter bracket onto the TV M I M H M K M I M B M D M F M J Two qualified persons are required Hook the TV onto the wall mount Loosen the upper thumbscrew spacing 4mm to adapter bracket 4mm ...

Page 6: ...move cable covers as required Connect cables to your TV and route along the arms Re attach the cable covers to hold the cables in place 8 Adjusting Wall Mount Head Depending on the weight of the display it is necessary to slightly loosen or tighten the adjustment screw using an Allen key M L ...