Unscrew the driver (D) from the housing (B).
Replace the driver and reconnect the wires from
the power and from the quick connector.
D
B
Screw back in place the driver box (K).
K
W W W . L U M E N W E R X . C O M
1
4
2
5
3
6
www.lumenwerx.com (T) 514-225-4304 (F) 514-931-4862 © All rights are reserved to LumenWerx ULC.
FILE NAME:POP-COLOR-DRIVER-REPLACEMENT-INST
November 13, 2019
Page: 2 / 3
LumenWerx ULC. reserves the right to change or modify product specifications without notification
IMPORTANT
: Installation instructions are shown with Pop Round and applies to all Pop Round and Pop Square fixtures
DRIVER REPLACEMENT - INSTALLATION INSTRUCTIONS
POP COLOR
NOTE
: Wire dimming conductors as Class 1
Pull down the diffuser (H) to get acces to the
springs (I). Squeeze the springs (I) to release
them from the brackets (J). Once all the springs (I)
have been released, slowly lower the diffuser (H)
retained by security cable (G).
G
J
H
1
2
DROP
I
I
Disconnect quick connectors (E) between driver
and diffuser (H). Remove security cable (G).
E
G
H
E
Unscrew and remove the driver box (K).
K
Disconnect wires from the driver (D) to the power
and to the quick connector.
D
