Attach security cable (G). Make wires connection
between the driver and the LED board by
connecting quick connectors (E). Screw the LED
plate holder (C) back in place.
G
C
E
Align and tilt the lens (A) to insert it back into the
housing (B).
B
A
Unscrew the LED plate holder (C) to get acess to
the driver (D). Disconnect quick connectors (E)
between driver and LED board. Remove security
cable (G).
Push the lens (A) up and guide it out of the housing
(B).
Disconnect wires from the driver (D) to the power
and to the quick connector.
Unscrew the driver (D) from the housing (B).
Replace the driver and reconnect the wires from
the power and from the quick connector.
D
B
C
G
E
A
D
D
B
W W W . L U M E N W E R X . C O M
1
4
2
5
3
6
www.lumenwerx.com (T) 514-225-4304 (F) 514-931-4862 © All rights are reserved to LumenWerx ULC.
FILE NAME:POP-COLOR-DRIVER-REPLACEMENT-INST
November 13, 2019
Page: 1 / 3
LumenWerx ULC. reserves the right to change or modify product specifications without notification
IMPORTANT
: Installation instructions are shown with Pop Round and applies to all Pop Round and Pop Square fixtures
DRIVER REPLACEMENT - INSTALLATION INSTRUCTIONS
POP COLOR
NOTE
: Wire dimming conductors as Class 1
E
FLUSH
E
