31
position
Initial Position:
Set the camera lens to return to the last operated
position or the first preset position after POWER ON
<Remark>
First default position = Preset 0
Motionless Preset:
When the function is enabled, the screen will Freeze
when Preset is executed. Freeze will be released
after Preset is completed
D-Zoom Limit:
Set the D-Zoom Limit, x1 - x12
PTZ Motion Sync:
When activated, PTZ synchronization Hour can be
achieved by controlling with the
Presets
<Remark>
Refer to the Preset speed setting for this feature. The speed may be
adjusted automatically due to the difference of PTZ moving range
7
Tally Lamp
Enable/ Disable Tally Light
Indicator Light Link Mode: Set whether the indicator is linked with RS232
command
Normal
(Not linked): The indicator light status and mode shall be set
separately.
- When the indicator light is on and the default mode is off, additional
command is required to set the indicator light mode
- Setting indicator light mode when the indicator light is off will not trigger
the indicator light
Link:
- When the indicator light is on, the default mode is red light
- Setting indicator light mode when the indicator light is off will turn on the
indicator light
5.2.7 Setting - Picture
<Remark>
Preview pane is not supported when NDI is on
No
Item
Function Descriptions
1
Picture Effect
Set picture effect, Off/ Neg/ Black and White
2
2D NR
2D noise reduction settings
3
3D NR
3D noise reduction settings
4
Image mode
The user may customize his/ her desired image mode
5
Image Mode Load
When no custom setting is needed, reset the picture parameters back to the
factory default by selecting this item
6
Gamma
Gamma Level adjustment; Adjustable when the image mode is set to Custom
1
2
3
4
5
6
7
8
9
10
