19
1st Level
Major Items
2nd Level
Minor Items
3rd Level
Adjustment Values
Function Descriptions
PTZ Assist
On/
Off
This function can only be enabled in
the Manual Focus (MF) mode
When PTZ Assist is enabled and
PTZ control is in operation, the focus
performs only once upon immediate
execution. The focus will not be
triggered afterward when the scene
changes
SMART AF
On/
Off
Turn on this function and AF will
mainly focus on the face
Ethernet
DHCP
On
/Off
Enable/Disable DHCP setting using
left and right arrow keys and press
[ENTER] to apply setting.
IP Address
192.168.100.100
Press [ENTER] to be in modify
mode; select the item to be modified
using the up and down keys, and
modify the value using the left and
right keys or the numeric keys.
Subnet mask
255.255.255.0
Press [ENTER] to be in modify
mode; select the item to be modified
using the up and down keys, and
modify the value using the left and
right keys or the numeric keys.
Gateway
192.168.100.254
Press [ENTER] to be in modify
mode; select the item to be modified
using the up and down keys, and
modify the value using the left and
right keys or the numeric keys.
Audio
Audio In
Line In
/Mic In
Set Audio In
Audio Enable
On/
Off
Turn on/off audio output
Audio Volume
0~
C
~10
Audio Volume Setting
Audio Delay
On/
Off
When the audio is not synchronized
with the video, enable this function to
set the audio delay time
<Remark>
Supported when NDI|HX
function setting is off
Audio Delay
Time(ms)
-1
~-500ms
Set audio delay time
<Remark>
Supported when NDI|HX
function setting is off
Encode Type
AAC
/ G.711
Set audio encode type
<Remark>
Supported when NDI|HX
function setting is off
Encode Sample
Rate
1. 48 KHz(AAC)
2. 44.1 KHz(AAC)
3. 16 KHz(AAC)
4. 16 KHz(G.711)
5. 8 KHz(G.711)
Set the encode type and sample rate
<Remark>
Supported when NDI|HX
function setting is off
System
Prompt
On/
Off
Turn on/off the prompt information on
the display
IR Receive
On
/Off
When it is Off, the remote control will
not be able to control the camera. At
this moment, turn off and then turn
on the power to restore control of the
remote control.
Tally Lamp
On/
Off
Select to enable or disable Tally
Lamp function.
