20
1st Level
Major Items
2nd Level
Minor Items
3rd Level
Adjustment Values
Function Descriptions
Tally CMMD Mode
Normal/
Link
Set whether the indicator is linked
with RS232 command
Normal
(Not linked): The indicator
light status and mode shall be set
separately.
When the indicator light is on and
the default mode is off, additional
command is required to set the
indicator light mode
Setting indicator light mode when
the indicator light is off will not
trigger the indicator light
Link:
When the indicator light is on, the
default mode is red light
Setting indicator light mode when
the indicator light is off will turn
on the indicator light
Language
English
/
中文
Initial Position
Last MEM
/ 1st Preset
Select the camera lens to return to
the last operated position or the first
preset position after POWER ON
<Remark> 1st Preset
= Preset 0
Control Device
Encoder /
Controller
Control Device setting,
Controller: for joystick
Encoder: for tracking system
Motionless Preset
On/
Off
When the function is enabled, the
screen will Freeze when Preset is
executed. Freeze will be released
after Preset is completed.
Control Port
RS-232
/RS-422
Choose whether the control interface
used is RS-232 or RS-422
Protocol
VISCA
/ Pelco D
Baud Rate
9600
/38400
Choose the transmission speed of
the control signal
VISCA Address
0
~7
The Protocol set to VISCA allows the
camera ID address to be assigned.
Select 0 for automation.
PELCO D Address 1
~255
The Protocol set to Pelco D allows
the camera ID address to be
assigned.
Output Mode
1.
3840x2160/59.94p
2. 3840x2160/50p
3. 3840x2160/29.97p
4. 3840x2160/25p
5. 1080p/59.94
6. 1080p/50
7. 1080p/29.97
8. 1080p/25
9. 720p/59.94
10. 720p/50
11. 1080i/59.94
12. 1080i/50
Choose the output resolution
Color Space
Standard Profile
/
REC.709 / BT.2020
Set the standard for color gamut
Factory Reset
On/
Off
Resume the factory default setting
Status
Display the current setting status
