Lumenmax Sp. z o. o.
ul. Złota 7/18 , 00-019 Warszawa
www.led-disinfection.com
[email protected]
After clicking on the ORING or on the field outside the lamp, the user is asked if he/she wants to start Annihilation
(UVC disinfection mode). If the user confirms the start of Annihilation, the device starts counting down the time
for the start of UVC Disinfection mode. The Annihilation start time can be edited in the Zone settings panel (in this
case the controller counts down 30 seconds). The countdown is indicated by an intermittent sound using the
Buzzer ( if the Buzzer is enabled in the settings panel ). After the Annihilation time is counted down, the UVC
disinfection mode will be activated immediately in all fittings in the Zone - the controller will send information to
all Devices. During the Annihilation mode each luminaire will signal it with a continuous Buzzer.
Lumenmax 2021, all rights reserved ©, users manual version V1.030521
23
