Radiolink AT9 Controller
1. Ensure all switches on top of the radio (Switch A, B, C,D) are switched to the
furthest position from you. And all switches at the front of the radio (switches
E,F,G,H) are in the far down position.
2. Turn on radio using the ON/Off switch.
3. Select the required mode you wish to fly in using switch G. Up towards the sky
is Pro mode, middle position is Semi Assist and down position is Assist mode.
Place drone on a flat surface and install the battery securely with battery straps then
plug the battery into the drone and ensure all cables and leads are clear of the
propellers.
To arm the drone ready to fly:
1. Ensure the throttle is at zero or in the furthest down position. (The drone will
not arm if the throttle is not in this position.
2. Move switch B to the down position to disable the safety mode.
3. Then to Arm the quad, move switch F to the up position. The motors will begin
to spin indicating the drone will now begin to respond to the main radio
controls.
After flight or directly after a crash, disarm drone immediately by moving switch F into
the down position and enable safety by moving switch B back to the up position..
11
