background image

1.  Introduction

The Lumencor SPECTRA family of light engines (SPECTRA, SPECTRA S and SPECTRAX) are designed for laboratory 
use by bioanalytical researchers and/or developers of life science instrumentation. The SPECTRA (all models) provides 3, 
4, 5, 6 or 7 spectrally discrete, bright, controllable light outputs directly to a sample; or in the case of fluorescence 
microscopy, to the objective. Each of the colors is produced by an independent module that has been optimized to 
produce a precise set of wavelengths.

This manual covers all SPECTRA models: SPECTRA X-YYY-ZZ or SPECTRAX X-YYY-ZZ. X denotes the number of 
colors, YYY denotes a unique customer code and ZZ denotes option and revision. The first Z variable indicates a 
standard SPECTRA if it is blank or a color mix or simultaneous output SPECTRA (or SPECTRA X) if it is an “S”. The 
second Z denotes the revision level. Any reference to “SPECTRA” in this manual shall apply to all SPECTRA models 
unless noted otherwise.

The light sources within the SPECTRA are controlled by software; either via a serial interface (RS-232 or USB) to a 
computer running a Lumencor supplied GUI or via a TTL interface to a computer running a third party microscopy 
software application.The user can enable or disable each source independently and change the intensity of each source 
independently. The only manual control is a power switch on the rear panel to turn on/off the power into the unit. A green 
power indicator on the rear cover is lit (“ON”) when the power supply is connected to the SPECTRA and the power 
switch is in the on position.

2.  Precautions and Warnings {Précautions et mises en garde}

A few simple practices will ensure trouble-free operation for the life of the light engine.

Les quelques règles simples suivantes permettront d’assurer un fonctionnement fiable pendant toute la durée de service 
de la source lumineuse.

Safety Instructions:

Please read and follow all safety instructions provided 

BEFORE

 using your new SPECTRA. Failure to comply with the 

safety instructions may result in fire, electrical shock, or personal injury and may damage or impair protection provided by 
equipment. Please save all safety instructions.

Instructions de sécurité

Veiller à lire et à respecter toutes les instructions de sécurité fournies 

AVANT

 d’utiliser le nouveau SPECTRA afin d’écar-

ter les risques d’incendie, de décharge électrique, de blessure corporelle et de possibles dommages ou défaillance de la 
protection offerte par l’appareil. Conserver toutes les instructions de sécurité.

Safety Definitions 

{

Définitions relatives à la sécurité}

Warning: 

Statements identify conditions or practices that could result in personal injury.

Avertissement

:

 déclarations qui identifient des situations ou des pratiques susceptibles d’entraîner des blessures cor-

porelles

Caution: 

Statements identify conditions or practices that could result in damage to your equipment. 

SPECTRA, SPECTRA S and SPECTRA X Instruction Manual

3

Summary of Contents for SPECTRA Light Engine















Reviews: