![background image](http://html1.mh-extra.com/html/lumencor/aura-light-engine/aura-light-engine_manual_1948043012.webp)
6. As soon the DC power supply is energized, the master power button (top right) will automatically
light up.
The light engine automatically starts when the power is connected; there is no need to
push the master power button
.
7. Wait 30–45 seconds for the initiation sequence (onboard microprocessor boot-up) to complete.
Do not press any buttons or insert any plugs during this time.
8. When the initiation sequence completes, “LUMENCOR” will flash on front display panel and then
be replaced by a display showing the current light engine IP address, the internal temperature
and the fan status.
At the same time, the fan will come on at HI for about 2 seconds and then
shut o
ff
automatically. The light engine is now ready for use. Prior to turning the light output on,
verify the output end of the liquid light guide or optical fiber is safely directed into an enclosed
optical path (e.g. a beam dump).
Notes:
1
Ensure that the distal end of the light guide or optical fiber is safely directed into an enclosed
optical path (e.g. microscope epi-illuminator or a beam dump) before turning the light output on. If
the light engine is equipped with an output adapter for an SMA-terminated optical fiber, connect the
fiber to the output adapter using the integral threaded sleeve.
2
To enable light output of the AURA Light Engine the external gate jumper, control key, remote
interlock jumper, and Liquid light guide must be inserted.
3
For subsequent start ups, use the master power button to start or shut down the light engine.
Shut down can also be accomplished using the “Shut Down” button in the GUI (Figure 5, left).
AURA Light Engine Manual 57-10011
12
Figure 5.
AURA Web GUI,:Control Tab (left) and Settings Tab (right).
Enable to Power
Control pod
Enable to use TTL
trigger inputs
Interlock Closed. If open (red)
press “manual reset’ button on front
panel to clear
9600,8,N,1
115200,8,N,1
Cyan Channel
on
Real time internal
temperature display
Real time electrical power
consumption display
Real time output power
display