Programmable DC Power Supply User’s Guide
16
Chapter 3 Programmable Interface
Press
【
RMT
】
to enter remote control mode.
3.1 To set the series port
Baud Rate: 9600, Check: No parity, Word Length: 8, Stop bit: 1
3.2 Programmable Commands
SCPI Commands
Description
*IDN?
Query the device identification
Return HA-PSA3515,BJA5.297.556, firmware
version
SYSTem:VERSion?
Query the device firmware version, Return the
version number
:LOCal
To set local control mode, return 1
VOLTage <NRf>
To set output voltage
MINimum
MAXimum
:PROTection <NRf>
:CLEar
CURRent <NRf>
MINimum
MAXimum
OUTPut OFF
ON
OUTPut?
MEASure?
MEASure:CURRent?
:MINimum?
:MAXimum?
To output minimum voltage
To output maximum voltage
To set OVP
To clear the OVP
To set output current
To output minimum current
To output maximum current
Turn off the output
Turn on the output
Query output status, Return 1, 0
Query all voltage/current
Query current
Query minimum current
Query maximum current
:VOLTage?
MINimum?
:MAXimum?
:PROTection?
Query voltage
Query minimum voltage
Query maximum voltage
Query OVP value
