Programmable DC Power Supply User’s Guide
15
key to clear the OVP function, the indicator lights off.
2.8.10 To enable the OVP function
Press
【
Prot Enable
】
to enable the protection. Press the key again to disable the protection.
2.8.11 To enable/disable the knob adjusting
While press the
【
RPG Enable
】
, user select adjusting knob to set the value, the step of
which is decided by
【
RPG Coarse
】
key. Press
【
RPG Enable
】
key again to exit the
knob setting.
2.8.12 To set the adjusting knob
Press
【
RPG Coarse
】
to select 0.1V/0.1A as step for knob adjusting. Press the key
again to select 1mA/1mA as step for adjusting knob.
2.8.13 To recall the presetting
Press
【
Recall
】
key to enter the storage address 1 to 6, then recall the saved
settings by pressing of
【
ENTER
】
key.
2.8.14 To save the presetting
Press
【
Save
】
key to enter the storage address 1 to 6, then save the present
settings to desired address by pressing of
【
ENTER
】
key.
2.8.15 To set the sense function
Press
【
Sense
】
key to control the output voltage by remote compensation mode.
Press the key again to exit the sense function and device return to no rmal output
mode.
