GAS BOTTLE AND REGULATOR
Handle your LPG bottles with care. When connecting or disconnecting your gas bottle, the connections are left-hand threads.
Always have your gas cylinder valve closed when travelling or not in use.
Only have an authorised service agency make any adjustments to your regulator.
Before use it is highly advised to check for any gas leaks using the soapy water method. Simply mix a small amount of dish soap
into some water causing as few bubbles as you can during this process & pour a small amount on the point where the hose
connects to your gas bottle.
If any leaks are present, you will see the gas causing bubbles begin to form.
If this occurs, turn off the gas bottle & check the connection point is secured & free of any debris, then reconnect & try the method
again, if no bubbles are created the connection is sealed & ready for use.
If bubbles are formed again try the method again with a different gas bottle.
Gas Warning
If you smell gas –
1. Extinguish all open flames, pilot lights and smoking materials.
2. Keep bystanders away.
3. Do not touch electrical switches
4. Shut off the gas supply at the cylinder valve.
5. Open doors and other ventilating openings.
6. Leave the area until the odour clears.
7. Have the gas system checked and leakage source corrected by an authorised gas installer before using the system again.
WATER TANKS
General cleaning
It is highly recommended to use a bought tank cleaning fluid multiple times a year to ensure there is no build-up of residues or
mould growth allowed inside the tank.
Caution: When in remote areas you may have to use water from untreated sources such as bore water or storm water, when
using these water sources please note that it could have various residues in it which can damage the tanks if left for a prolonged
period or cause mould growth within the tanks.
Mould
If you find that your tank has developed mould, immediately flush any water from it & use a store purchased specified tank
cleaner on it as per its instructions.
Once the mould has been cleaned out use the red cordial method detailed in the troubleshooting section of this guide.
Storage
When your Unit is in storage it is recommended to store it with the water tanks full to maximum capacity, almost overflowing, by
doing this you can prevent mould growth as there will be no air space left in which mould can grow.
After removing your Unit from storage, it is imperative to empty & flush out the tanks completely before filling with water you
intend to use on your camping trip.
ENSUITE ITEMS
Toilet & Cassette
From time to time you should give the cassette a thorough clean, especially prior to lengthy storage periods. Aside from putting a
hose in the top opening and allowing water to squirt out the spout. Another way is to mix a cup of napisan in a 5L bucket of water
& pour it down the toilet, then let it slush around in the cassette when driving & empty before use.
When storing the hybrid ensure the cassette is clean & completely dry inside & out.
Please Note: It is highly advised to add the correct waste chemicals to the waste cassette when in use. Dosages from brand to
brand will vary but all are appropriate.
AIR CONDITIONERS
All manufacturers provide operating instructions with their product and it is recommended that these be read carefully to ensure
correct operation. Also, complete and return your Warranty Card/Certificate as this will assist you should a problem occur at a
later date.
Your air conditioner is covered by the air conditioner manufacturer’s own warranty. Please contact the following:
>>
Dometic ph.: (03) 9545 5655
D07 Rev I
36
Summary of Contents for Camper Trailer
Page 1: ...CARE MAINTENANCE MANUAL ...
Page 52: ......
