Lumber Jack DP13-580B, Safety And Operating Manual

Page: 5 / 22

DP13-580B 03
GENERAL POWER TOOL SAFETY WARNINGS
c) When Battery pack is not in use, keep it away
from other metal objects, like paper clips, coins,
keys, nails, screws or other small metal object
that can make a connection from one terminal
to another.
Shorting the battery terminals
together may cause burns or a fire.
D) User abusive conditions, liquid may be
ejected from the battery; Avoid contact. If
contact accidentally occurs, flush with copious
amounts of water. If liquid contacts eyes, seek
medical help immediately.
Liquid ejected from
the batter may cause irritation or burns.
7. Additional Safety and working
Instructions
7.1. Dust from materials such as lead-containing
coatings, some wood types, minerals and
metals can be harmful to one’s health and
cause allergic reactions, leading to respiratory
infections and/or cancer.
Materials containing
asbestos may only be worked by specialists.
Observe the relevant regulations in your country
for the materials to be worked.
7.2. Prevent dust accumulation at the
workplace.
Dust can easily ignite.
8 Additional Safety Warning for Bench
Drills
8.1 Always wear hairnet for long hair, and
make sure you are wearing safety goggles.
8.2 Do not wear gloves, ties or loose clothing.
8.3 while drilling make sure the piece is
secured with a vice; never hold the work
piece by hand! Never keep your fingers near
where they could touch the drill in case the
piece moves suddenly.
8.4 Do not use the machine until it has been
properly installed in accordance with the
instructions provided.
8.5 Do not switch on the machine until all
pieces have been firmly tightened together.
8.6 Do not use the machine if it is damaged or
functioning badly.
8.7 Perform all adjustments before switching
on the machine, make sure to set table height
or depth stop to prevent the drill entering the
table.
8.8 (If Applicable) Always make sure chick key
is removed before use.
8.9 Before switching on the machine check the
chuck has been mounted correctly and
securely, and that the safety guard is engaged.
8.10 In operations stick to recommended
speeds for the drilling accessories and material
being used.
8.11 Switch off the power before handling the
drill or chuck. Once finished remove drill and
clean the table before leaving the machine.
8.12 Always lock the on/off switch when
leaving the machine.