DP13-580B 10
Installing drill bits
Insert the drill bit into the chuck far enough to obtain
the maximum gripping of the chuck jaws. The chuck
jaws are approximately 1” long. When using a small
drill bit, do not insert it so far that the jaws touch the
flutes (spiral grooves) of the bit.
Make sure the drill bit is centred in the chuck before
tightening the chuck with the key. Tighten the drill bit
well, so that it doesn’t slip while drilling. Turn the
chuck key clockwise to tighten, counter clockwise to
loosen.
ASSEMBLY INSTRUCTIONS
Summary of Contents for DP13-580B
Page 21: ...DP13 580B 19 Parts Diagram...
Page 22: ...DP13 580B 20 Parts Diagram...
