LulzBot TAZ 3.0, User Manual

Page: 26 / 162

Setup Your Printer
11. Now that the Y axis is mounted and the extruder tool head is installed
you should set your printer on a stable, flat, and level surface large
enough for extra space around the printer. Make sure your printer
work space is clear of anything that could obstruct the movement of
the printer. Move the Y axis to the back of the printer to ensure
unobstructed movement of that axis.
Make sure there are no flammable
fabrics or liquids near the printer space . It is also best to not put your
printer near a drafty window or air conditioner vent.
12. Unwrap the power supply and USB cables.
MAKE SURE THE POWER SUPPLY IS COMPLETELY UN-
PLUGGED BEFORE MOVING ON TO THE NEXT STEP
.
13. Locate the power supply and USB receptacles along the back of the
TAZ electronics enclosure (Fig. 1.14, page 27). Locate the power
supply and the included AC power cable (Fig. 1.15, page 27). Locate
the DC power cable plug on the power supply. Connect the DC locking
plug into the DC connector on the TAZ electronics enclosure (Fig.
1.16, page 28). The plug is keyed which may require rotating the plug
until the keys line up and the plug can be pushed in. Once you have
pushed in the plug turn the locking sleeve clockwise until it is tight
against the electronics enclosure (Fig. 1.17, page 28).
26