LulzBot TAZ 3.0 User Manual Download Page 136

Page: 136 / 162

Printing with the Graphic LCD

Selecting a File From the SD and Starting a Print

Once the hot end and heat bed have reached the desired temperature the
printer is ready to print. From the main menu select the

Print from SD

option. You will now see a selection of the directories and .gcode files on
the SD card. Navigate through the menu to locate the file you would like
to print. Select the desired file to begin the print.

Making Manual Movements With the Graphic LCD

As noted previously (page 132), making numerous manual movements is

easier done using the Printrun host software. However, you can make
manual movements with the GLCD. Navigate to Prepare

Move Axis.

You will then select the length of the movement and then the axis to move.

Note, that only 1mm and 0.1mm movements are allowed for the Z axis and
extruder.

When at the move screen turn the selection knob clockwise to move the

axis in millimeters in the positive direction and counter-clockwise for the
negative direction. Push the selection knob to complete the manual move.

136

Summary of Contents for TAZ 3.0



































































































































































Search results

Summary of Contents for TAZ 3.0

Reviews:

Related manuals for TAZ 3.0

Brands by name

Popular brands

LulzBot TAZ 3.0, User Manual

Search results

Summary of Contents for TAZ 3.0

Reviews:

Related manuals for TAZ 3.0

Brands by name

Popular brands