background image

8

Home

The “Home” function is used to quickly remove the LN-Manipulators
from the work area.
The LN-Manipulator will be driven automatically to the maximum
end-position, however can be precisely returned to its previous position.
*

The speed and direction of movement are adjustable in the menu

Press the “Home” key

Pressing the movement key again causes the LN-manipulator
returns precisely to its starting position.

Press the home key again

The home function is deactivated.

LED is out.

Features

It is possible to stop the automatically move to the End-position

Pressing either one of the two movements keys
drives the LN-Manipulator to the end-position

Activation

LED begins to flash.
The home function is activated.

LED contstantly illuminated

One LED is illuminated
one is off

The home key flashes

Deactivation

Moving to
the Endposition

And

If one of the movement keys is pressed while the LN-Manipulator
is moving to the endposition, the manipulator will stop immediately.

Pressing the movement key again the LN-manipulator returns exactly
to its starting position.

*

Both LED's on the movement keys are illuminated and the LED on the home key flashes.

Summary of Contents for SM6-4















Reviews: