7
Features
Selection keys for high / low
High velocity enabled
Low velocity enabled
Speed of
Movement
Hand-wheel
Resolution
The hand-wheel has three resolutions that can be individually
adjusted in the menu.
An illuminated LED shows which of the resolutions
is currently enabled:
* See Menu: Set hand-wheel resolution.
S
L
H
tandard,
ow or
igh
Power
on / off
The ” power-off ” function stops current flow to the the LN-Axes motors,
however in doing so, the exact position (in μm) will be retained.
LN-Axes enabled
* These keys can be used to control the movement of the motorized LN-Axes.
Both LEDs illuminated
Both LEDs not illuminated
Speed selection for the direction keys can be pre-set individually in the menu.
There are two speeds available for selection (high / low)
* See Menu: Set movement (fast / slow)
The LN-Axes are switched off
.
* The motorized LN-Axes are unable to be moved; the power is switched off
