Operating manual – English
B - 13
6.2 Configuration areas
CFG: In the CFG mode the values for the up-
per threshold (Hi) and the lower threshold (Lo)
are entered.
This menu item can only be selected if the
DP mode is active. The value range for Hi
and Lo is from 0.0 to 9.9. The units (°C or °F)
are taken from the temperature setting
currently selected for the DP mode.
The minimum difference between Hi and Lo must be 1.0.
The values for Hi (upper display) and Lo (lower display) are entered
and confirmed one after another.
Unit 1:
You select the unit of temperature with Unit 1. °C and °F are
available for selection.
Selection can be made with
㒋
and
㒊
, confirmation with
㒉
.
Unit 2:
This menu item can only be selected if the TH mode is active.
With Unit 2 you select the unit of absolute humidity (g/m
3
), relative
humidity (% r.H.) or the dewpoint temperature (dp°C, dp°F). % r.H.
is set at the factory.
Selection can be made with
㒋
and
㒊
, confirmation with
㒉
.
°C
°C
TH
IR
DP
CFG
Summary of Contents for LFE200IR
Page 46: ...BA ITH 01 INT1...
