LUDLUM 3030 Manual Download Page 79

Page: 79 / 79

Model 3030 & 3030E Series

Technical Manual

Appendix A

Ludlum Measurements, Inc.

Page A-1

November 2017

Model 3030-2 and 3030E-2

The Ludlum Model 3030-2 (LMI Part # 48-3992) and Model 3030E-2
(LMI Part # 48-3448-2) are dual-channel counters designed for

simultaneous alpha and beta sample measurement. Below are the
differences between the Model 3030/3030E and the 3030-2/3030E-2.

Counting Mode

The counts per minute (CPM), Becquerel (BQ), or counts per second
(CPS) modes may be enabled to allow the count to be converted

(automatically, in real time) to CPM, Becquerel, or CPS. The Becquerel
and CPS display modes will show the count with two decimal places.

Overload

The LCD display will toggle between the current reading and OL on
both the alpha and beta displays.

Sample Logging

The code for the logged sample changes to the following:

S - Scaler

C - Counts per minute

B - Becquerel

P - Counts per second

RS-232 Command Differences

The "D" command to set/read the counting mode changes to the

following:

D0 - Set count mode to scaler

D1 - Set count mode to counts per minute

D2 - Set count mode to Becquerel

D3 - Set count mode to counts per second

D4 - Read current count mode

The D4 command will return the following string:
"SCA" - Scaler

"CPM" - Counts per minute
"BQ " - Becquerel

"CPS" - Counts per second

PC Interface software (LMI Part# 1370-043)

Version 1.4.9 or higher is required and may be downloaded from the

LMI website http://www.ludlums.com.

Appendix

Summary of Contents for 3030
















































































Search results

Summary of Contents for 3030

Reviews:

Related manuals for 3030

Brands by name

Popular brands

LUDLUM 3030, Manual

Search results

Summary of Contents for 3030

Reviews:

Related manuals for 3030

Brands by name

Popular brands