LUDLUM 2360, User Manual

Page: 39 / 72

Model 2360 Technical Manual
Section 7
Ludlum Measurements, Inc. Page 7-13 July 2016
Replace the drive letter with the correct drive letter of the CD-ROM
drive. Follow the onscreen prompts to install the software. When
complete, the software should be installed in C:\Program
Files\2360Win. A shortcut is created in the Start Menu under “Ludlum
Measurements, Inc.”
R
EMOVAL OF
M
ODEL
2360 I
NTERFACE
S
OFTWARE
To remove the program, start from the Windows Desktop. Click on Start
Button, Settings, Control Panel, and then Add/Remove Programs. Find
LMI 2360 Interface from the list and highlight, then click on the
add/remove button to start uninstall.
Setup will prompt to ensure removal of program LMI 2360 Interface is
acceptable.
Setup will also present a prompt asking if you wish to keep, remove, remove
none, or remove all. Files can be removed since they are installed in
C:\Program Files\Model 2360 and should not cause any problems.
Uninstall screen appears and the program removal will be complete.
C
ONNECTING TO A
C
OMPUTER
Using the supplied cable, connect the end with the female connector to the
Model 2360 and the other end to a free COM port on your computer. The
pin-outs of the cables are as follows:
9-pin cable
Model 2360 Computer
2 2
3 3
5 5
7 7
8 8
25-pin cable
Model 2360 Computer
2 3
3 2
5 7
7 4
8 5