EN
LUCTRA | 15
English
Intended use
The lamp is designed for lighting a workplace in dry indoor rooms (ambient temperature of
25°C).
Only perform the activities as they are described in this user manual. Any other use constitutes
unauthorised misuse. The manufacturer accepts no liability for damage resulting from it.
For your safety
Basic safety instructions
• The user must have read and understood this user manual before starting to use the lamp
to ensure safe handling.
• Follow all safety instructions! You put yourself and others at risk if you disregard these
instructions. Retain this user manual for future reference and always keep it within easy
reach.
• If you ever sell or pass on the lamp, please ensure that you also hand over this user manual.
• Use this lamp only if it is in perfect working order. Please contact our service team if the
lamp or a part thereof (including the LEDs) are faulty.
• This lamp is not designed to be used by persons with limited physical, sensory or mental
capabilities or a lack of experience and/or knowledge unless they are supervised by a
person responsible for their safety or have received instructions from them on how to use
the lamp.
• Make sure that children do not play with the lamp.
• Always observe the valid national and international health and safety regulations and work
directives.
Electrical Safety
• Only plug the lamp into earthed sockets that have been properly installed, earthed and
tested.
• Make sure that the power supply corresponds to the connection data for the lamp before
plugging in the lamp.
• Do not touch the power plug wit wet hands! Always grasp the plug and not the cable to
pull the plug out of the socket.
• Do not bend, crush, tug or run over the power cable. Protect it from sharp edges, oil and
heat.
• Do not lift the lamp by the cable.
• Check the plug and cable before each use.
• Pull out the power plug immediately if the power cable is damaged. Never use the lamp if
the power cable is damaged.
• Always switch off the lamp before removing the plug.
• Always pull out the power plug immediately if the lamp is not used for a longer period of
time.
• Always pull out the power plug before transporting or repositioning the lamp.
• Only use extension cables that are suitable for the lamp and its surroundings.
• Do not use additional dimmers.
• If the power cable on the lamp is damaged, it must be replaced by the manufacturer to
avoid any risk of danger.
Product-specific Safety Instructions
• Do not cover the lamp with cloths or other objects. This may cause a fire hazard.
Summary of Contents for 9201
