FISHFINDER
3
2.
USING
THE
WIFI
TRANSDUCER
The WIFI transducer is powered by built-in lithium battery; therefore, it is necessary to fully
charge the battery through the charger. Firstly, unscrew the transducer, as shown in Figure 3:
the charge port is in the middle; the red light is lit when charging, it presents the battery
is charging, as shown in Figure 4; when the red light is off, it represents the battery is fully
charged.Before using,press the power switch to power on the transducer, the blue light is lit,
as shown in Figure 5, it presents the transducer is on working, then sure screw the cap to
prevent the water into. You can simply attach the WIFI transducer to the end of your fishing
line and cast it into the water as you would a normal float or lure, then you can open you
APP and you are ready to fish.
NOTE:
When casting the WIFI transducer into water,shock from abrupt contact with rocks will
damage your WIFI transducer, we recommend using your WIFI transducer in water deeper
than 1 foot only
。
f
i
g-3
f
i
g-4
f
i
g-5
Summary of Contents for FF916
Page 1: ...FF916...
Page 2: ......
Page 3: ...FISHFINDER 1 WIFI Fish Finder Operations Manual...
Page 79: ...www goodluckycn com...
