Lucky Star P4A845S User Manual Download Page 57

Page: 57 / 73

Video Options

Values

Meaning

Blank
Screen

The screen will be blank (black) only.

V/H sync +
blank

The vertical and horizontal sync pulses will be stopped, and the
screen will be blank.

Video Off
Method

DPMS
support

If your monitor supports DPMS, it can be switched off through
that.

Yes

Video Off In
Suspend

Stop Grant

Suspend Type

PwrOn
Suspend

Modem IRQ

Values

Meaning

This disables the modem IRQ

Modem Use
IRQ

3 - 11

Select an IRQ line that will be assigned to your modem here.
Choose from: 3 (default), 4, 5, 7, 9, 10, 11.

Power Button

Values

Meaning

Instant-off

Switches the system off immediately when pressing the power
button.

Soft off by
power button

Delay 4 Sec

This requires you to press the power button for at least 4
seconds before the system switches off.

Wake Events

Values

Meaning

Enabled

Allow the system to wake up on a PCI card IRQ.

Wake-Up By
PCI Card

Disabled

Will not allow the system to wake up on a IRQ form a PCI card.

Resume By Alarm

Values

Meaning

All manuals and user guides at all-guides.com

Summary of Contents for P4A845S










































































Search results

Summary of Contents for P4A845S

Reviews:

Related manuals for P4A845S

Brands by name

Popular brands

Lucky Star P4A845S, User Manual

Search results

Summary of Contents for P4A845S

Reviews:

Related manuals for P4A845S

Brands by name

Popular brands