42
Enabled
The BIOS will test whether the floppy has 40 or 80 tracks
during boot up. All new floppy drives are 80 tracks.
Boot-up
Floppy Seek
Disabled
The BIOS will not test the amount of tracks.
Boot Devices
The first to third boot device items allow you to select what device the system should boot
from. If the BIOS fails to boot from the first boot device, it will attempt to boot from the
second boot device, if that fails too, the third boot device is tried. If you set the
boot other
device
item to enabled, the BIOS will try to boot from other devices if the first to third
choices all fail. If you set this item to disabled, the BIOS will not boot if the first to third
devices all fail to boot.
Values
Meaning
Floppy
The system attempt to boot from diskette.
(first boot device default)
LS 120
The system will attempt to boot from an attached LS 120 drive.
(Third boot device default)
HDD 0
The system will attempt to boot from the first HDD.
(Second boot device default)
SCSI
The system will attempt to boot from the first device attached to
the first SCSI interface.
CD-ROM The system will attempt to boot from the first CD-ROM found.
HDD1
The system will attempt to boot from the second HDD.
HDD2
The system will attempt to boot from the third HDD.
HDD3
The system will attempt to boot from the fourth HDD.
ZIP100
The system will attempt to boot from an attached ZIP 100 drive
LAN
The system will attempt to boot over the network. You will
require a LAN card with boot BIOS for this option to function.
First ~ Third
boot device
Disabled
This disables booting from this device.
Keyboard Typematic Rate and Delay Settings
If you set the
typematic rate setting
item to disabled, the system will use the defaults of 6
and 250 for the rate and delay items. If you set it to enabled you can select the values
yourself. Refer to the table below:
Values
Meaning
All manuals and user guides at all-guides.com
