Lucky Star P4A845S User Manual Download Page 52

Page: 52 / 73

Mode 1
Mode 2
Mode 3

Mode 4

fastest, check your HDD to see what PIO mode it supports.If
your IDE device supports UDMA mode, then it best to enable
that mode since it is considerably faster than PIO mode. (Set to
auto for auto-detection)

Auto

The BIOS will automatically use Ultra DMA Mode if the IDE
device supports it.

xxx - UDMA

Disabled

This will disable the use of Ultra DMA for this device.

Enabled

Block mode allows faster transfer of data between the system
and the HDD. Most modern HDDs support it.

IDE HDD
Block Mode

Disabled

Block Mode is not used.

USB Setting

Values

Meaning

Enabled

This will allow use of a USB drive.

USB
Controller

Disabled

If you do not need a USB drive, set this item to disabled.

Enabled

This will allow use of a USB keybaord.

USB
Keyboard
Support

Disabled

If you do not need a USB keyboard, set this item to disabled.

Enabled

This will allow use of a USB mouse.

USB Mouse
Support

Disabled

If you do not need a USB mouse, set this item to disabled.

Display Initialization

Values

Meaning

PCI Slot

The BIOS will first search for a VGA adapter on the PCI bus, if
one is found it will be used as primary display.

Inie Display
First

Onboard

The onboard AGP is first scanned.

Floppy Drive

Values

Meaning

Enabled

This will allow use of a floppy drive.

Onboard
FDD
Controller

Disabled

If you do not need a floppy drive, set this item to disabled.

AC97 Setting

Values

Meaning

Enabled

This will allow use of a onboard AC97 sound codec.

AC97 Audio

Disabled

If you do not need a onboard AC97 sound codec, set this item
to disabled.

All manuals and user guides at all-guides.com

Summary of Contents for P4A845S










































































Search results

Summary of Contents for P4A845S

Reviews:

Related manuals for P4A845S

Brands by name

Popular brands

Lucky Star P4A845S, User Manual

Search results

Summary of Contents for P4A845S

Reviews:

Related manuals for P4A845S

Brands by name

Popular brands